Ultrasound-assisted solution crystallization of fotagliptin benzoate: Process intensification and crystal product optimization

The ultrasound-assisted crystallization process has promising potentials for improving process efficiency and modifying crystalline product properties. In this work, the crystallization process of fotagliptin benzoate methanol solvate (FBMS) was investigated to improve powder properties and downstream desolvation/drying performance. The direct cooling/antisolvent crystallization process was conducted and then optimized with the assistance of ultrasonic irradiation and seeding strategy. Direct cooling/antisolvent crystallization and seeding crystallization processes resulted in needle-like crystals which are undesirable for downstream processing. In contrast, the ultrasound-assisted crystallization process produced rod-like crystals and reduced the crystal size to facilitate the desolvation of FBMS. The metastable zone width (MSZW), induction time, crystal size, morphology, and process yield were studied comprehensively. The results showed that both the seeding and ultrasound-assisted crystallization process (without seeds) can improve the process yield and the ultrasound could effectively reduce the crystal size, narrow the MSZW, and shorten the induction time. Through comparing the drying dynamics of the FBMS, the small rod-shaped crystals with a mean size of 9.6 μm produced by ultrasonic irradiation can be completely desolvated within 20 h, while the desolvation time of long needle crystals with an average size of about 157 μm obtained by direct cooling/antisolvent crystallization and seeding crystallization processes is more than 80 h. Thus the crystal size and morphology were found to be the key factors affecting the desolvation kinetics and the smaller size produced by using ultrasound can benefit the intensification of the drying process. Overall, the ultrasound-assisted crystallization showed a full improvement including crystal properties and process efficiency during the preparation of fotagliptin benzoate desolvated crystals.     

High efficiency and broad bandwidth terahertz vortex beam generation based on ultra-thin transmission Pancharatnam–Berry metasurfaces

The terahertz(THz) vortex beam generators are designed and theoretically investigated based on single-layer ultra-thin transmission metasurfaces. Noncontinuous phase changes of metasurfaces are obtained by utilizing Pancharatnam–Berry phase elements, which possess different rotation angles and are arranged on two concentric rings centered on the origin.The circularly polarized incident THz beam could be turned into a cross-polarization transmission wave, and the orbital angular momentum(OAM) varies in value by lh. The l values change from ±1 to ±5, and the maximal cross-polarization conversion efficiency that could be achieved is 23%, which nearly reaches the theoretical limit of a single-layer structure.The frequency range of the designed vortex generator is from 1.2 THz to 1.9 THz, and the generated THz vortex beam could keep a high fidelity in the operating bandwidth. The propagation behavior of the emerged THz vortex beam is analyzed in detail. Our work offers a novel way of designing ultra-thin and single-layer vortex beam generators, which have low process complexity, high conversion efficiency and broad bandwidth.     

关于吸收式碳捕集热力学机制的探索

热再生吸收式碳捕集的传统认识难以揭示其热力学机制,一种新的认识是"热-化学能"转换中存在中间能量形式。本文从热力学碳泵概念出发,对吸收式碳捕集理想系统进行了解耦,其可视为"热机-碳泵"的热力学组合,探索了极限效率的表达,并采用第二定律效率作为评价参数对已有中试试验系统进行了性能水平探索。结果表明,理想循环性能系数仅取决于热源汇温度、碳源汇浓度;中试系统第二定律效率普遍低于20%。本文探索了热驱动的吸收式碳捕集热力学机制,为新型吸收剂设计提供了新思路。     

超亲水-超疏水组合壁面冷凝性能研究

本文通过水热法,结合气相沉积法和掩膜紫外光刻法,在玻璃基底上成功地制备了一种具有多尺度结构的超亲水-超疏水组合壁面,并对制备的具有不同润湿差异的组合壁面的冷凝效率进行了测试。结果表明壁面的冷凝效率取决于亲疏水区域的宽度和润湿性差异,其中当亲水区域宽度为0.80 mm,接触角约为0°,疏水区域宽度为0.95 mm,接触角为158°时,其冷凝效率相比光滑铜片的冷凝效率可以提高39%。进一步分析表明,液滴在极端润湿模式的组合表面的润湿分界线处具有较高的体积传输速率,且在超亲水区形成的连续微流通道加快了冷凝液滴快速排放,提高了整体表面的自更新能力。本文的研究,将为复杂润湿界面滴状冷凝的优化提供方向。     

Microwave‐associate synthesis of Co3O4 nanoparticles as an effcient nanocatalyst for the synthesis of arylidene barbituric and Meldrum's acid derivatives in green media

In this study, Co₃O₄ nanocatalysts were constructed in environmentally appropriate conditions using controlled, effective, and facile microwave method. The final nanostructures were characterized by SEM, XRD, and TEM analyses. The products had a small size distribution, homogeneous morphology, and crystallographic structures associated with the formation of Co₃O₄ nanostructures. Moreover, EDS mapping analysis confirmed the existence of Co and O elements in the final structure, and the magnetic properties of the samples were investigated by VSM. The application of this nanostructure in a catalytic process was further examined, and the results suggested that it could be used as a novel candidate for the synthesis of arylidene barbituric and Meldrum^,s acid through Knoevenagel condensation of aldehydes by barbituric and Meldrum^,s acid in aqueous media. The high yield of these nanocatalysts would be justified by the nature of the nanostructure as well as the experimental procedure developed in this study, which affected the physicochemical features of the products.     

Characterization and Bioavailability of Vitamin C Nanoliposomes Prepared by Film Evaporation-Dynamic High Pressure Microfluidization

Vitamin C nanoliposomes were prepared by combining a conventional method (film evaporation) with dynamic high pressure microfluidization. Their physicochemical characterizations (antioxidant activity, particle size, entrapment efficiency, morphology, in vitro drug release, and storage stability) and skin permeation behavior were investigated. The results showed that vitamin C nanoliposomes, having equivalent DPPH (2, 2-diphenyl-1-picrylhydrazyl) free radical scavenging capacity of pure vitamin C solution without loss of their biological activity, exhibited better storage stability at 37°C for 24 hours and at 4°C for 60 days, a more excellent sustained drug release as well as higher skin penetration rate than vitamin C liposomes.     

Reverse fragment based drug discovery approach via simple estimation of fragment contributions

1. Download : Download high-res image (110KB)
2. Download : Download full-size image

     

Beiträge der Radiotracertechnik zur Rationalisierung einer großtechnischen Anlage zur Caprolactamproduktion

This paper reviews ways in which radioactive tracer techniques can he used to improve the efficiency of a caprolactam production plant, Residence time spectra and material distributions in different parts of the plant were measured by application of sodium 24, bromine 82 and technetium 99m. The investigations led to improved cumeneoxidators and gave useful informations on the catalytic decomposition of the phenolic tar and the hydrogenation process of phenol. It could he shown that the construction of the lactam extractor must he varied and the results of the tracerexperiments made in the distillation unit contributed to a higher quality of the final product.     

Global Parametric Sufficient Efficiency Conditions for Semiinfinite Multiobjective Fractional Programming Problems Containing Generalized （a,n,p）-V-Invex Functions

In this paper, we discuss numerous sets of global parametric sufficient efficiency conditions under various generalized (α, η, ρ)-V-invexity assumptions for a semiinfinite multiobjective fractional programming problem.     

Effects of clouds, sea surface temperature, and its diurnal variation on precipitation efficiency

The effects of clouds, sea surface temperature, and its diurnal variation on precipitation efficiency are investigated using grid-scale data from nine equilibrium sensitivity cloud-resolving model experiments driven without large-scale vertical velocity. The precipitation efficiencies are respectively defined in surface rainfall, cloud, and rain microphysical budgets. We mathematically and physically demonstrate the relationship between these precipitation efficiencies. The 2℃ increases in spatiotemporal invariant sea surface temperature (SST) from 27℃ to 29℃ and from 29℃ to 31℃, and the inclusion of diurnal SST difference 1℃ and the 1℃ increase in diurnal SST difference generate opposite changes in the precipitation efficiency by changing ice cloud-radiation interactions. The radiative and microphysical processes of ice clouds have opposite effects on the precipitation efficiency because of the rainfall increase associated with the reduction in the saturation mixing ratio caused by the exclusion of radiative effects and the decrease in rainfall related to the reduction in net condensation caused by the exclusion of deposition processes. The radiative effects of water clouds on the precipitation efficiency are statistically insensitive to the radiative effects of ice clouds.